CONTROL SOLUTIONS CS Medical Systems CS6103, Patient Instruction Manual

Page: 25 / 36

Patient Instruction Manual CS6103 Interferential Stimulator
Page 25 of 36 Control Solutions LLC
Attaching Electrodes
Follow the steps in Table 6 to attach the electrodes to the treatment area.
Step Action
1 Verify the CS6103 unit is off before use. This is indicated by a blank LCD
display.
2 Connect the wire leads to the electrodes and place the electrodes firmly onto
the skin at the site to be treated. In general the electrodes will be placed in a
crisscross pattern around the treatment area. See Figure 5.
3 Insert the wire lead plugs into the CS6103 CH1 and CH2 jacks ensuring that
they firmly snap into place.
Table 6 - Attaching Electrodes
Figure 5 - Electrode Placement
Do not use the unit while enclosed in the carrying case.
Warning