"You are now in the main menu:"
"To review or program call out telephone number one, press 1."
"To review or program call out telephone number two, press 2."
"To review or program call out telephone number three, press 3."
"For current temperature, press 4."
"To review or program temperature alarm setpoint, press 5."
"To review or program security code, press 6."
"For battery status, press 7."
"For power status, press 8.
If the Voice Dialer does not recognize an entry, you will hear "invalid entry". Re-enter your menu selection
within 15 seconds to continue with the programming sequence.
IMPORTANT: After programming, disconnect your telephone from the PHONE receiver port on the front of the
Voice Dialer. The phone cannot be used for outgoing phone calls while connected to the Voice Dialer.
Operating Instructions
UPON ALARM
The Voice Dialer will call out with one or more of the following messages:
"There is a temperature alarm emergency at location (your three digit security/location code). Help
is needed immediately!"
AND/OR
"There is a power alarm emergency at location (your three digit security/location code). Help is
needed immediately!"
AND/OR
"There is a battery alarm emergency at location (your three digit security/location code). Help is
needed immediately!"
The alarm message(s) is repeated once, followed by:
"To disable call out, enter security code followed by star key."
You must enter the correct security code within 15 seconds or the Voice Dialer will hang up
and call again in the selected interval (15 minutes or 2 hours). If you enter the correct security
code within 15 seconds you will hear:
"Call-out is now disabled. To return to main menu, press 1, otherwise hang up."
You now have the option of returning to the main menu to review or change the system data.
IMPORTANT: The Voice Dialer will continue to call out with an alarm message until disabled, even if alarm
conditions have been corrected.
CALLING THE VOICE DIALER FROM A REMOTE LOCATION
When called from a remote location, the Voice Dialer will answer after five rings and you will hear:
"Enter security code followed by the star key."
If you enter the correct security code within 15 seconds, and the Voice Dialer is not in alarm,
you will enter the main menu and hear:
"You are now in the main menu. (no alarm) Press 1 to. . ."
If the Voice Dialer is in alarm, you will hear one of the three alarm messages described in
Operating Instructions above. The alarm message is repeated once, followed by:
"To disable call out, press 0. Otherwise, to return to the main menu, press 1."
For information on compatiblity with answering machines, see "IMPORTANT INFORMATION" section.
Alarm delay feature:
If dip switch #2 is placed in the DOWN position, the Voice Dialer will delay 45
minutes during a temperture alarm only. A temperature alarm condition must be
present for 45 minutes before unit will call out.
IMPORTANT INFORMATION
