2
FIGURE 1
S1
S4
S3
S2
Page 1: ...INE FUSE ON THE RED POWER WIRE THERE ARE NO REFUNDS FOR BURNT OUT UNITS Tools you will need 12vdc test light wire connectors varies depending on application and or scotch locks NOTE use dielectric gre...
Page 2: ...2 FIGURE 1 S1 S4 S3 S2...
Page 3: ...itter 3 Flip the keychain remote over and and press and release any single button THEN WAIT UNTIL THE BLUE LIGHT STOPS BLINKING AND PROCEED 4 Go to the base unit and push the black button The red LED...
Page 4: ...reeze warm up before using Check all connections and make sure you have a clean power and ground Check the fuse Diagnose any problems with what the unit is connected to Other Considerations Only one t...
