3
Paperclip hole LED window
TROUBLE SHOOTING
•
Make sure the LED is lit when the receiver power is turns on. If the LED is not on, check your
power supply to the receiver.
•
With the receiver powered up, make sure the LED comes on when the buttons are depressed on
the key fob. If the LED does not come on the receiver is not getting a signal from the transmitter.
If the battery in the transmitter is more than 2-3 years old check battery voltage with a meter or
replace battery.
•
After completing the above steps and the unit still will not function, follow the procedure,
Set-up
of Key fob to Receiver Address
.
•
If the unit still will not operate. Check connections to the component that the unit is trying to
actuate using a voltmeter.
•
If the transmitter was allowed to freeze, warm up before using.
•
Check all connections and make sure you have a clean power and ground.
•
Check the fuse.
•
Diagnose any problems with what the unit is connected to.
•
•
Limited 90 day warranty on electronics see wireless warranty on the website for details
