background image

•  Two (2) screws (included) to secure the Touch 

Screen to the dock

Accessories

•  Control4 Power over Ethernet Injector  

(AC-POE1-B), sold separately

•  International Power Supply (C4-TSIPS, for UK, EU, 

and AU)

Specifications

Screen

7” 16:9 WXGA Color LCD Module 
Resolution: 800 x 480 
Brightness: 400 nits (without Touch 
Screen)

Wireless

-Built In IEEE802.11 b/g/n Wireless LAN 
-Integral Antenna (b/g/n supported) 
-Authentication: WEP, WPA, WPA2

Dimensions 

(W x H x D)

7.5” (190.5 mm) x 5” (127 mm) x .075” 
(19.05 mm) (without charging dock)

Weight

1.75 lbs. (.793 kg)

Network

-WiFi (802.11 b/g/n) wireless access 
point (WAP) already configured to 
communicate with a Control4 Controller 
(e.g., HC-300).  
 
-Wireless-N is recommended for video. 
 

Note

: Intercom usage. 802.11b is not 

recommended or supported for video 
intercom.

Front and Rear Panel Descriptions

Figure 1. Front View

Camera

. Used for video Intercom with another 

compatible Control4 device in another room.

Programmable Buttons (4)

. Used to program 

Supported Models

•  C4-TSMC7-EN-BL -  7” Portable Touch Screen 

with Camera, Black

•  C4-TSMC7-INT - 7” Portable Touch Screen with 

Camera, International Version

Box Contents

Carefully unpack the Control4® 7” Portable Touch 
Screen with Camera and ensure the following items 
are included in the box. 

CAUTION!

 

Do not apply excessive pressure 

to the Touch Screen display during handling. 
Doing so can crack the screen and damage 
the Touch Screen.

•  Control4 7” Portable Touch Screen with Camera 
•  Control4 7” Portable Touch Screen with Camera 

Dock

•  DC Power Adapter (only use the power supply 

provided)

•  (Optional) Two (2) screws for securing the dock 

to the Touch Screen

•  Warranty Card

Requirements

•  Phillips head screwdriver

7” Portable Touch Screen 

with Camera 

Setup Guide  

4

1

2

7

10

3

5

6

2

8

9

10

1

Summary of Contents for C4-TSMC7-EN-BL










Reviews: