™
1
Supported Model
• C4-8x8HDMIVSW-B 8×8 HDMI Matrix Switch
Introduction
The Control4® 8x8 HDMI Matrix Switch
enables up to eight (8) HDMI
inputs to be distributed to eight (8) zones, with Ethernet pass-
through and IR and RS232 control.
• Enables up to eight (8) AV sources for multi-room AV
distribution via full-matrix switching
• System control is enabled through Ethernet, giving installation
flexibility for new or retrofit installations
• Easily installed with Control4 Simple Device Discovery Protocol
(SDDP)
• 2U rack-mount ears conform to EIA 19" rack standards
Box Contents
• 8×8 HDMI Matrix Switch (C4-8x8HDMIVSW-B)
• Power cord and external power supply
• Warranty card
• Rack-mount ears (2)
• Four (4) 8-32 x 3/8" Phillips screws
• Four (4) feet (pre-attached), which can be removed for device
rack mounting.
Available Accessories
• HDBaseT Receiver (C4-HDBTE-B)
Specifications
HDBaseT Receiver
Model number
C4-8x8HDMIVSW-B
Voltage
12VDC
Current
8.5A
Network connectivity
10/100 BaseT Ethernet
Full matrix switching
Yes
Rack-mount
Yes, 2U rack-mount ears included
Source inputs
HDMI
8
HDBaseT Ethernet inputs
8
Zone outputs
HDBaseT outputs
8
HDMI outputs (exclusive-or of
HDBT 7/8)
2
Stereo audio output (3.5 mm
stereo jack)
8
Control
RS232 serial ports
8
IR ports
8 (IR frequency: 38 KHz)
Environmental
Operational temperature
32˚F ~ 104˚F (0˚C ~ 40˚C)
Humidity
5% to 95% non-condensing
Storage
-4˚F ~ 158˚F (-20˚C ~ 70˚C)
Miscellaneous
Dimensions
13.4" x 10.1" x 3.9"
(341 x 257 x 100 mm) (w/feet)
13.4" x 10.1" x 3.6"
(341 x 257 x 91 mm) (no feet)
Weight
8.64 lbs (3.92 kg) (unit only)
Shipping weight
12.48 lbs (5.66 kg)
(box, power supply & cord)
HDBaseT Receiver
Model number
C4-HDBTE-B
Voltage
12VDC
Current
1.5A
Dimensions
4.0" x 4.8" x 0.9"
(102 x 123 x 23 mm) (w/mount)
Weight
1.3 lbs (0.6 kg) (unit only)
Shipping weight
3.0 lbs (1.35 kg) (box & power
supply)
Front and Rear Panel Description
Front Panel
LED Indicators
A
Status—One blink=unable to obtain IP address from DHCP
server. Off indicates normal operation.
B
Link—Indicates a connection to Director.
C
Power—Flashes while booting. Solid blue when powered on.
A B C
8×8 HDMI Matrix Switch
Installation and Setup
Guide
