Contrel EMA11, User Manual, Page: 34 / 58

EMA11 - USER MANUAL
-34-
Variable reading average line, three-phase system and neutral current
•
(A - kA) rms average three - phase system current [
Σ
I
av
]
•
(A - kA) rms average current L1 phase [I
1av
]
•
(A - kA) rms average current L2 phase [I
2av
]
•
(A - kA) rms average current L3 phase [I
3av
]
•
(A - kA) rms average neutral current N [I
nav
]
Note: The average current is calculated in the average time set in the setup.
The average neutral current will be showed only if the insertion type is 4
wires.
Variable reading maximum average line, three-phase system and
neutral current
•
(A - kA) rms maximum average three - phase system current [
Σ
I
maxav
]
•
(A - kA) rms maximum average current L1 phase [I
1maxav
]
•
(A - kA) rms maximum average current L2 phase [I
2maxav
]
•
(A - kA) rms maximum average current L3 phase [I
3maxav
]
•
(A - kA) rms maximum average neutral current N [I
nmaxav
]
Note: The maximum average current is calculated in the average time set in
the setup. The maximum average neutral current will be showed only if the
insertion type is 4 wires.
Variable reading THD of voltage
•
(Thd) total harmonic distortion of voltage L1 phase [Thd
1
]
•
(Thd) total harmonic distortion of voltage L2 phase [Thd
2
]
•
(Thd) total harmonic distortion of voltage L3 phase [Thd
3
]
Variable reading THD of current
•
(Thd) total harmonic distortion of current L1 phase [Thd
1
]
•
(Thd) total harmonic distortion of current L2 phase [Thd
2
]
•
(Thd) total harmonic distortion of current L3 phase [Thd
3
]
Variable reading K factor
•
k factor L1 phase
•
k factor L2 phase
•
k factor L3 phase