2
Introduction
Please read the manual carefully before using the controller. And please keep it for future use.
This controller can increase the brightness of normal 24V LED light by 3
-
4 times. It’s mainly used to control ma-
chine vision and industrial inspection LED light source.
1
Features:
•
Internal and external trigger input. High and low electrical levels can be used flexibly.
•
For circuits control by individual, can set the lighting time from 10 to 990uS.
•
Power cut memory, setting loch, fault detection, warning function.
•
The lighting time and percentage can be manually controller by the knob on the front panel, and can also
be externally controller by PLC or machine vision devices.
•
Control the lighting time precisely.
•
Fast trigger response time.
•
Be applicable to every 24V power input LED light source, 48V output, 60W total power consumption.
2 Panel Description
Mode switch
Digital display
Function indicators
Channel Indicators
Channel switch
RS232
-
port
AC power input switch
Pulse width: Lighting time adjust mode
Control (X%): Pulse width adjust mode
Lighting time display(10
-
990uS)
Pulse width display(10
-
100%)
Pulse width: light time adjust mode
Control (x10%): Pulse width set mode
LOCK: interface control locked
L1
-
L4 channel setting switch display
Function 1: L1~L4 setting select switch
Function 2: Long press 2S, Manual setting
interface locked
PC control communication port
Adjust Knob
Function 1: Light time adjust(10
-
990uS)
Function 2: Pulse width adjust(10~100%)
INT: Internal trigger mode
EXT: External trigger mode
Internal/External
trigger switch
Trigger signal high and low level switch
External trigger connecting port(10
-
pin)
Output DC48V(1pin positive, 3Pins negative)
Trigger signal mode switch
Output port
AC power input receptacle
AC100~240V/50~60Hz
USER’S MANUAL FOR VT
-
LT2
-
PLU2460
-
4