The Hex Key is used to tighten the framework together
as you assemble your uDivide™. Make sure the Glide Strip
is firmly in place to help cushion your Insert Panels.
7
Fig #3
First locate the Horizontal Bar with one (1) Glide Strip and
slide it into place at the bottom of the two Round Post
slots as shown in Fig #3.
6
Fig #4
8
Remember to peel away all protective film from Insert
Panels before Assembling. Slide Panels down inside the
vertical slots of the Round Posts on top of the Horizontal
Bar. If your configurations include Vertical Bars then insert
the middle Vertical Bar with Glide Strips as shown in Fig #4.
5
Locking Assembly
Horizontal / Vertical Bar
To install locking assemblies into
the horizontal frame bars, first
remove the Hex Screw, then place a
Locking Assembly into the end of
the bar and insert the Hex Screw
back into the Locking Assembly
Page 4
