Front Loading Combo
Model No.: RV-WD900S (TITANIUM)
Level the washer
1. When
positioning
the
washing
machine, please first check if the legs
are closely attachedto the cabinet. If
not, please turn them to their original
positions with hand or spanner
andtighten the nuts with spanner.
2. After positioning the washing machine,
press four corners on top cover of
washing machine in sequence. If
the washing machine is not stable
when being pressed, this leg shall be
adjusted.
3. Ensure the positioning status of washing
machine. Loosen the lock nut with
spanner and turn the leg with hand
until it closely contacts with the floor.
Press the leg with one hand and fasten the nut closely to the
cabinet with the other hand.
4. After being locked properly, press four corners again to make
sure that they has been adjusted properly. If it is still unstable, it
has to repeat Steps 2 and 3
5. Put a solid cylinder (e.g. pop cans) oppositely on the top cover
of the washing machine from in the left, right, front and back
directions. If the cylinder keeps stable, the washing machine
is positioned level. If it rolls, the washing machineis positioned
unlevel. The rolling direction is the direction of lower ground
surface. Then the two legs in this direction shall be raised at
the same time until the washing machine is level. Steps 1~3 are
repeated to make the bottom legs closely against the ground
and the nuts shall be locked tightly.
Electrical connection
- As the maximum current through the unit is 12A when you are
using its heating function, please make sure the power supply
system (current, power voltage and wire) at your home can meet
the normal loading requirements of the electrical appliances.
- Please connect the power to a socket which is correctly installed
and properly earthed.
- Make sure the power voltage at your place is same to that in the
machine’s rating label.
P.13
P.14
Operating Instructions
Installation Instructions
Level the washer
5.Put a solid cylinder (e.g. pop cans) oppositely on the
top cover of the washing machine from in the left, right,
front and back directions. If the cylinder keeps stable, the washing machine is
positioned level. If it rolls, the washing machineis positioned unlevel.The rolling direction is
the direction of lower ground surface.Then the two legs in this direction shall be raised at the
same time until the washing machine is level.Steps 1~3 are repeated to make the bottom legs
closely against the ground and the nuts shall be locked tightly. .
3.Ensure the positioning status of washing machine.
Loosen the lock nut with spanner and turn the leg
with hand until it closely contacts with the floor. Press
the leg with one hand and fasten the nut closely to the
cabinet with the other hand.
4.After being locked properly, press four corners again to
make sure that they has been adjusted properly. If it is
still unstable, it has to repeat Steps 2 and 3
1.When positioning the washing machine, please
first check if the legs are closely attachedto the
cabinet. If not, please turn them to their original
positions with hand or spanner andtighten the
nuts with spanner.
2.After positioning the washing machine, press
four corners on top cover of washing machine
in sequence. If the washing machine is not
stable when being pressed, this leg shall be adjusted.
Electrical connection
- As the maximum current through the unit is 12A when you are using its heating function,
please make sure the power supply system (current, power voltage and wire) at your
home can meet the normal loading requirements of the electrical appliances.
- Please connect the power to a socket which is correctly installed and properly earthed.
- Make sure the power voltage at your place is same to that in the machine's rating label.
- Power plug must match the socket and cabinet must be properly and effectively earthed.
- Do not use multi-purpose plug or socket as extension cord.
- Do not connect and pull out plug with wet hand.
- When connecting and pulling out the plug, hold the plug tightly and then pull it out. Do
not pull power cord forcibly.
- If power cord is damaged or has any sign of being broken, special power cord must be
selected or purchased from its manufacturer or service center for replacement.
WARNING
WARNING – To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Operating instructions
Checklist and preparation before washing clothes
Please read this operation method carefully to avoid the troubles of washing machine and
damages of clothes.
Check if the first-washed clothes will bed decolorized.
After a white towel touched with liquid detergent is used to wash the invisible corners of the
clothes, check if the white towel is stained with
clothes' original color.
As for the scarves and those clothes that easily
get decolorized among imported clothes, please
wash them separately before washing.
As for the stains on sleeves, collars and pockets,
use the liquid detergent and wash it with brush
gently. Finally put them into the washing machine
to achieve more ideal washing effects.
As for temperature-sensitive clothes, they shall
be washed as required in the labels. Otherwise,
it may cause color change or distortion.
Keep in Mind:
Never put the clothes to be washed in washing machine for a long period of time.
Otherwise it may get moldy and cause spots. Therefore, please wash the clothes in time.
The clothes also may get color changed or distorted if they are not washed according to
the stated washing temperature.
Clothes that can not be washed by washing machine
The clothes that may get distorted if being immersed in water:
Ties, waistcoats, western-style clothes, outer garments etc. may have obvious shrinkage
if being immersed in water; the decolorized clothes such as blended spinning clothes of
artificial fiber etc.
