Contour + 1500, User Manual

Page: 10 / 141

10
+
It is best to adhere the mount to the helmet at room temperature.
+
Locate the best spot for your camera. The mounting area should
be smooth and flat.
+
Check the angle and position by sliding camera onto
mount and taking a test video.
+
Clean the surface with alcohol and adhere mount.
The adhesive takes up to 24 hours to fully cure.
+
Slide your camera onto rails.
+
Unlock the mount and rotate
camera to the perfect angle.
+
Press “Lock” to lock the
camera into place.
+ ROTATING FLAT SURFACE MOUNT
Note:
Before using any of our mounts in recreational activities, you need to determine if the
holding power of the mount is appropriate and safe. Contour does not warrant lost cameras.