manualshive.com logo in svg

CONTOUR NEXT LINK 2.4, User Manual

Share
Download
CONTOUR NEXT LINK 2.4 User Manual Download Page 35

65

TECHNICAL

& CARE

Caring for Y

our Meter

Disinfecting Your Lancing Device

Supplies Needed for Disinfecting:
•  Clorox

®

 Germicidal Wipes containing 0.55% sodium hypochlorite (bleach) 

•  Paper towels 
•  Timing device
1.  Before disinfecting, clean the lancing device as described above in Cleaning Your 

Lancing Device. 

2.  Remove the endcap and lancet, if present.

For proper disinfection, you must keep all lancing device surfaces wet for 60 seconds.

For proper disinfection, you must keep all endcap surfaces wet for 60 seconds.

3.  Using a new Clorox Germicidal Wipe, carefully wipe all 

external and internal surfaces of the endcap until wet.

4.  Use Clorox Germicidal Wipes to disinfect all exposed 

surfaces of your lancing device until wet.

5.  Dry all lancing device surfaces and endcap with a clean paper towel if needed.

The lancing device graphics are for illustration purposes only. Refer to the lancing 

device insert for detailed instructions.

85587269_CntrNextLINK_2_4_UG_EN_FpBp_v4.indd   65

11/18/16   9:03 AM

TECHNICAL

& CARE

64

®

Caring for Y

our Meter

Cleaning Your Meter

Supplies Needed for Cleaning:
•  Clorox

®

 Germicidal Wipes containing 0.55% sodium hypochlorite (bleach)

•  Paper towels
1.   Carefully clean the meter with Clorox Germicidal Wipes until all soil is removed.

Do not allow cleaning solution to run into the meter through areas such as around the 

buttons or the meter’s test strip or data ports.

2.  Dry as necessary with a clean paper towel.

Disinfecting Your Meter

Supplies Needed for Disinfecting:
•  Clorox Germicidal Wipes containing 0.55% sodium hypochlorite (bleach)
•  Paper towels 
•  Timing device

Using a new Clorox Germicidal Wipe, carefully wipe all outer surfaces of your meter until 

wet. Do not allow cleaning solution to run into the meter through areas such as around the 

buttons or the meter’s test strip or data ports.

For proper disinfection, you must keep all meter surfaces wet for 60 seconds.

1.  Before disinfecting, clean the meter as described above in Cleaning Your Meter.

Cleaning Your Lancing Device

Supplies Needed for Cleaning:
•  Clorox

®

 Germicidal Wipes containing 0.55% sodium hypochlorite (bleach) 

•  Paper towels
1.  Clean the lancing device with Clorox Germicidal Wipes until all soil is removed. 
2.  Dry as necessary with a clean paper towel.

2.  Dry all meter surfaces and test strip port using a clean paper towel if needed.

Strip Port

USB Connector

(under cap)

Buttons

85587269_CntrNextLINK_2_4_UG_EN_FpBp_v4.indd   64

11/18/16   9:03 AM

65

TECHNICAL

& CARE

Caring for Y

our Meter

Disinfecting Your Lancing Device

Supplies Needed for Disinfecting:
•  Clorox

®

 Germicidal Wipes containing 0.55% sodium hypochlorite (bleach) 

•  Paper towels 
•  Timing device
1.  Before disinfecting, clean the lancing device as described above in Cleaning Your 

Lancing Device. 

2.  Remove the endcap and lancet, if present.

For proper disinfection, you must keep all lancing device surfaces wet for 60 seconds.

For proper disinfection, you must keep all endcap surfaces wet for 60 seconds.

3.  Using a new Clorox Germicidal Wipe, carefully wipe all 

external and internal surfaces of the endcap until wet.

4.  Use Clorox Germicidal Wipes to disinfect all exposed 

surfaces of your lancing device until wet.

5.  Dry all lancing device surfaces and endcap with a clean paper towel if needed.

The lancing device graphics are for illustration purposes only. Refer to the lancing 

device insert for detailed instructions.

85587269_CntrNextLINK_2_4_UG_EN_FpBp_v4.indd   65

11/18/16   9:03 AM

TECHNICAL

& CARE

64

®

Caring for Y

our Meter

Cleaning Your Meter

Supplies Needed for Cleaning:
•  Clorox

®

 Germicidal Wipes containing 0.55% sodium hypochlorite (bleach)

•  Paper towels
1.   Carefully clean the meter with Clorox Germicidal Wipes until all soil is removed.

Do not allow cleaning solution to run into the meter through areas such as around the 

buttons or the meter’s test strip or data ports.

2.  Dry as necessary with a clean paper towel.

Disinfecting Your Meter

Supplies Needed for Disinfecting:
•  Clorox Germicidal Wipes containing 0.55% sodium hypochlorite (bleach)
•  Paper towels 
•  Timing device

Using a new Clorox Germicidal Wipe, carefully wipe all outer surfaces of your meter until 

wet. Do not allow cleaning solution to run into the meter through areas such as around the 

buttons or the meter’s test strip or data ports.

For proper disinfection, you must keep all meter surfaces wet for 60 seconds.

1.  Before disinfecting, clean the meter as described above in Cleaning Your Meter.

Cleaning Your Lancing Device

Supplies Needed for Cleaning:
•  Clorox

®

 Germicidal Wipes containing 0.55% sodium hypochlorite (bleach) 

•  Paper towels
1.  Clean the lancing device with Clorox Germicidal Wipes until all soil is removed. 
2.  Dry as necessary with a clean paper towel.

2.  Dry all meter surfaces and test strip port using a clean paper towel if needed.

Strip Port

USB Connector

(under cap)

Buttons

85587269_CntrNextLINK_2_4_UG_EN_FpBp_v4.indd   64

11/18/16   9:03 AM

85587269_CntrNextLINK_2_4_UG_EN_FpBp_v5_UnMaskedPlaced.pdf:68

Summary of Contents for LINK 2.4








































Reviews:

No comments

Brands by name

Popular brands

Load more brands