4
Load the Bullets
Installation the Cartridge
1.
2.
Remove the bullet cartridge by pulling it towards the rear of the launcher, tilting the front of the
cartridge upward, and then lifting it out.
Load the Bullets with the rounded tip facing out.
Insert the cartridge back into the bullet launcher by pushing the back of the cartridge into the
small wheel at the rear of the launcher and then tilting the front of the cartridge downward until it
clicks into place.
Bullet Launcher
Installation
Pair your bullet launcher to the Battle
The bullet slot must be connected to the pusher so that the pusher can push the bullet out
Brain by plugging it into the top of the
Battle Brain via the Brainwave Connector
and make sure the connection is in place.
Seat the back of the bullet
cartridge as shown here
1
3
2
Seat the back of the bullet
cartridge as shown here
PUSHER
