11
FLIGHT
Step 1: Turn on the drone and set down on a level surface
• The drone will auto-trim to this level surface.
• All lights blinking red.
Step 2: Turn On The Remote Control & Pair With Drone
• Power on the remote control and link the aircraft automatically.
• When rear lights flash blue and front lights white, pairing is successful.
NOTE: You can connect to the drone WiFi signal at this time to view the current
drone on the Contixo F35 app, or wait until after GPS is calibrated.
Step 3: Connect App
Contixo - F35 - XXXX
• Connect your smartphone to the WiFi of the drone and check the drone’s
status on the “Contixo F35” app.
• Open the “Contixo F35” application on your smartphone to access the
control interface.
