OPERATING INSTRUCTIONS
To reduce the risk of electric shock, this appliance has a grounded plug. This plug will fit into
a grounded outlet. If it does not fit, contact a qualified electrician to install a proper outlet.
DO NOT CHANGE THE PLUG IN ANYWAY.
CAUTIONS
The Pedicute
™
should not be used if the following cases are present:
tuberculosis, benign and malignant tumors, hemorrhages, inflammations of the skin, phlebitis or thrombosis,
open or fresh wounds, bruises, broken skin or varicose veins, undetermined calf pain, or joint pain.
●
Consult a physician if you have any questions regarding therapeutic use of this product.
●
Consult a physician before using if clients are experiencing unexplained pain, swollen muscles,
or if they have recently sustained a serious muscular injury.
●
Keep away from children.
●
Discontinue use of massager/heater if pain increases or swelling occurs after application.
●
If clients are pregnant, please consult a physician before using.
IMPORTANT NOTICE
In order for the Pedicute to function properly it must operate at room temperature (at least 65
o
F). If for any
reason it is not at room temperature and one tries to activate the basin heater, the heating lights will continually
blink. This is normal and once the unit is at room temperature the basin heater will function normally.
USER/MAINTENANCE INSTRUCTIONS
The Pedicute massaging/heating platform is designed for use in a
professional salon environment only with The Pedicute tub or as dry heated foot massager.
1)
Make sure massager/heater is in OFF position.
2)
Fill tub with warm water and place Pedicute tub on top of the massager and plug massager into
wall outlet. Never plug or unplug the massager/heater while client’s feet are in the water. To eliminate
splashing, do not fill tub with more than 1 and 1/2 gallons of water (approximately 2.5 inches deep).
Do not fill Pedicute tub to capacity.
3)
The heat setting is desired to maintain the temperature of warm water, not to heat cold, or room
temperature water.
4)
Have clients sit in a chair and place feet in the water.
NEVER STAND IN THE PEDICUTE.
5)
Turn Pedicute massager heater on by pressing the ON/OFF button and select setting on the touchpad
located on the unit.
6)
Select one or a combination of the settings below:
●
Vibration and Heat (combination High/Low of vibration and heat)
●
Heat High/Low (heat only)
●
Vibration High/Low (vibration only)
7)
To turn off, simply press the OFF button on the touch pad.
8)
To select heat High/Low/Off press the heat button one, two, or three times.
9)
To select vibration High/Low/Off press vibration button one, two, three or four times (for power massage).
10)
Pedicute massager/heater can also be used as a dry foot massager when used without water.
Attention: use heat on low setting for dry use (without Pedicute Tub) to prevent burning.
11)
Do not hang unit from power cord.
12)
To clean Pedicute massager/heater, wipe with a damp cloth (Never submerge unit in water).
Do not use any strong chemical cleaners such as benzene or acetone.
13) CHECK WITH YOUR STATE BOARD FOR SPECIFIC CLEANING AND/OR SANITIZING
REQUIREMENTS.
© 2016 Continuum Footspas, LLC
Pedicute - August, 2016
