5935 W. 84th St. Suite A Indianapolis, Indiana 46278 (855) 423-2181 www.continu.us
Choose a location for the antenna. The antenna should be placed away from any
other metal objects which might interfere with reception. (FIG. 1)
1)
Note:
The direction of the base mount determines the direction of the antenna. The base of the
mount is an oval, which will help you determine the direction with its long and short sides (FIG 2).
The long sides will run from the front of the vehicle to the back. With the Dipole’s directed
towards the back.
NEW INSTALLATION INSTRUCTIONS
1)
Attach the four dipole antenna’s included with the CA-1000WIFI
2)
Align the antenna head with the base mount. Dipole antenna’s need to face the back
of the vehicle.
Insure that cables are long enough to reach their destination points inside the
vehicle.
4)
3)
Use the provided #8, 1/2” screws to secure the Antenna head to the base.
5)
Apply sealant around the base mount to seal edges.
After the base has been secured to the roof of the vehicle, follow these instructions.
ATTACHING THE ANTENNA HEAD
NEW MOUNTING INSTRUCTIONS
FIG. 2
10”
10”
20”
Min. Distance
Front of V
ehicle
RECOMMENDED
ZONE
FIG. 1
Antenna Head
Roof / Ceiling
Apply Sealant around edge of
the base, sealing all gaps
between Base Mount & Roof.
Base Mount
Dipole antenna
#8, 1/2” Screws
Before installing CA-1000WIFI, it is recommended that you check with your vehicle
manufacturer for any special screw or installation requirements. Follow the assembly
diagram below (FIG 3.) to install your CA-1000WIFI.
FIG 3.
Front of V
ehicle
Dipoles
Long Side
Short Side
