Continental Underfloor HeatMax 34005 Installation And User Manual Download Page 3

Page: 3 / 4

Rev:08/19
© 2019 Continal

Group Ltd t/as Continental Underfloor

4. Using a screwdriver with a 2.5mm or 3mm blade, make all power, pump, 2-port zone

valve, boiler, programmer, thermostat and zone actuator terminal connections,

depending on the heating configuration, boiler type and control (see the following

wiring diagrams)

Replace the HeatMax™ UFH wiring centre cover and replace all of the cover screws

Suggested cabling

Wiring schematics

Item

Cable

Fused spur / programmer to wiring centre

2-core + earth

UFH system pump wired to wiring centre

2-core + earth (fitted)

Programmable room thermostat to wiring
centre or wiring centre extension

2-core

Standard room thermostat to wiring centre
or wiring centre extension

4-core

Wiring schematic 230V switching to boiler

Summary of Contents for HeatMax 34005

Page 1: ...for warm water underfloor heating systems Key features It connects HeatMax room thermostats to the corresponding HeatMax zone actuators The zone actuator state open closed is indicated by green LEDs...

Page 2: ...tion External time clock or programmers are connected to the mains supply terminals The entire UFH system will switch on and off following the programme from this clock Installation NOTE Do not make a...

Page 3: ...ontrol see the following wiring diagrams 5 Replace the HeatMax UFH wiring centre cover and replace all of the cover screws Suggested cabling Wiring schematics Wiring schematics Item Cable Fused spur p...

Page 4: ...tinal Group Ltd t as Continental Underfloor All rights reserved E OE Wiring schematic for volt free switching to boiler Wiring schematic boiler switching via zone valve Want more information 0333 800...