Continental Refrigerator Ergon 1.0, Original Instructions Manual

Page: 11 / 16

11 Contononta netin Synne REMOTE
5.2.4 wtnchtog nC nhn nrtp dtnt dtypatS/
etto dtypatS
NOTE: The trip data display is an element in the
normal view of the display while the main display
is an element in the zoom view of the display.
» Briefly press the 4 button or push down
vertically on the joystick
3
:
– to switch to the next trip data display in the
normal view (
see document DISPLAY).
– to switch to the next display value for the
main display in the zoom view (
see docu-
ment DISPLAY).
4
3
Fig.: Switching to the trip data display/main
display
5.2.5 nnntog nhn atghntog eCdn
» Press the /
/
5 button (several
times, if necessary) to switch to a different
lighting mode (
see document DISPLAY).
5
5
Fig.: Setting the lighting mode
5.2.6 Coftgurtog ynnntogy
to nhn ynn-up enou
NOTE: You cannot use the set-up menu while
riding. Settings in the set-up menu can only be
modified when the cycle is stationary.
NOTE: If you do not make any entries in the
set-up menu for 10 seconds (press button/operate
joystick), the set-up menu closes automatically
and the unit returns to the preset display view.
1. Press the 4 button for 3 seconds or push
down vertically on the joystick
3
to open the
set-up menu ( see document DISPLAY).
2. To change the displayed menu item:
– press the 1 button or push the joystick
3
forwards/up to increase the setting
value or move up to the next setting option.
– press the
2
button or push the joystick
3 back/down to decrease the setting value
or move down to the next setting option.
3. Briefly press the 4 button once or push
down vertically on the joystick
3
to change
to the next menu item.
4. Press the
4
button for 3 seconds or push
down vertically on the joystick 3 to exit the
set-up menu.
3
4
1
2
Fig.: Changing settings