4
6
7
5
2
1
3
OFF/ON
MIC
READ ALL INSTRUCTIONS BEFORE USE.
WARNING-- To reduce the risk of fire, electric shock, or serious personal injury:
· Keep this product out of the reach of children and pets. This product is not intended for use by
children. Close supervision is necessary when using any electrical product near children.
· Do not leave the product unattended while in use. Always unplug the product from the electrical
outlet when it is not in use.
· Always ensure the product is unplugged from the electrical outlet and allowed to cool before
handling, relocating, or cleaning it.
· Do not handle the product, jar, or wax while the product is in use, as they will be hot.
· Do not immerse the Power Cord, plug, or product in water or other liquids.
· To disconnect the product from the electrical outlet, first slide the Power Switch to “OFF,” and then
pull directly on the plug; do not pull on the Power Cord.
· Do not plug or unplug the product into/from an electrical outlet with a wet hand.
· Review the candle manufacturer’s instructions to ensure the safety of using its candles with this
product.
· Do not use the product with jar candles that are frosted, cracked, or damaged.
· Ensure that any attached lid is removed from the jar before using the product with the jar.
· Do not use votive, tea lights, or pillar candles on the product.
· Do not use the product to warm food or beverages.
· Do not light the jar candle while using it with this product.
· Do not operate the product if it has a damaged or cut Power Cord or plug, if wires are exposed, if it
malfunctions, or if it has been dropped or damaged. Do not attempt to examine or repair this
product yourself. Only qualified service personnel should perform any servicing; take the product
to the appliance repair shop of your choice for inspection and repair.
CAUTION-- To reduce the risk of personal injury:
· This product is intended solely for indoor, non-commercial, household use in warming jar candles
only; do not use the product outdoors or for any other purpose.
· Watch candles carefully, as some may overflow when melted.
· Always place the product on a flat, level, stable, heat and stain-resistant surface.
· Do not allow the Power Cord to hang (e.g., over the edge of a table or counter) where it may be
tripped over or pulled.
SPECIAL INSTRUCTIONS:
A short power supply cord is provided to reduce the risk resulting from becoming entangled in or
tripping over a longer cord. Extension cords are available and may be used if care is exercised in their
use. If an extension cord is used:
- The marked electrical rating of the extension cord must be at least as great as that of the
product;
- Arrange the longer cord so that it will not drape over a countertop or tabletop where it
can be tripped over, snagged, or pulled on unintentionally (especially by children).
WARNING: This product is equipped with a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
CAUTION: Use only scented or fragranced jar candles in clear, glass jars. Do not use frosted, cracked,
or damaged jar candles, and do not place bare, plastic, votive, tea light, or pillar candles on the
product.
NOTE: This Candle Warmer is designed to let the wax in the glass jar melt slowly, allowing the
fragrance to be released continuously. Using a jar candle larger than 3 inches wide and 2¾ inches high
is not recommended.
1. Plug the Power Cord into a standard 120-volt AC outlet.
2. Remove any attached lid from the jar candle, and then place the jar candle onto the Warming Plate.
3. To turn on, slide the Power Switch to the “ON” position. The Power Indicator will illuminate
indicating that the heating element is on.
CAUTION: Do not touch the Warming Plate, jar, or wax while the product is in use as they will be hot.
4. To turn off, slide the Power Switch to the “OFF” position, and then unplug the Power Cord from the
electrical outlet.
Bluetooth Function:
Turn unit on:
Press on / off button (4) for One Second.
Search for Bluetooth Signal:
Press off/on button (4) for one second, sound “Bluetooth mode” and the Bluetooth search LED (6)
flashes as a status indicator. Start mobile phone Bluetooth search mode. Tap “CE-Tech” from the menu,
Phone will be connected to Mug Warmer. After phone is paired, the Bluetooth Mug Warmer will
automatically detect your phone after Mug Warmer is turned on or phone is brought in range. (Phone
must have Bluetooth function on)
Play song/music:
Open the music player in phone. Select desired song and press play on phone. To “Play or Pause music
from Mug Warmer, press Bluetooth button (2). Short press "PREV / V-" button (1) to select the previous
song, press and hold to reduce volume reduction; short press "NEXT / V +" button (3) to select the
next song, press and hold to increase.
Telephone answering function:
When a call comes in, press Bluetooth button (2) to answer. To reject call, press and hold Bluetooth
button (2).
USB Charger:
Whenever the Mug Warmer is plugged into the wall outlet, the USB charger is active. To charge your
phone or tablet remove the silicon cover from the USB plug by rotating it counter clockwise. Be
careful not to pull the silicon cover out of its socket. We recommend that you replace the silicon cover
back over the USB port whenever it is not in use. Make sure USB cover is dry before replacing on the
USB Charger.
WARNING: Always ensure the product is unplugged and allowed to cool before handling, relocating,
or cleaning it.
· Clean the surface by wiping with a damp cloth and allow it to dry completely before storing or using
it again.
NOTICE: Do not use harsh or abrasive cleaners/pads to clean the product.
· Store the product in a cool, dry place.
Electrical Specifications
TECHNICAL DATA
Rated voltage
：
120VAC~ 60Hz
Rated current
：
.17A
Rated power input
：
20W
