W415-2947 / A / 09.01.20
EN
6
general information
As with most electronic devices, your new electric appliance has been designed to operate at temperatures
between 5°C (41°F) and 35° C (95°F). During the colder winter months, allow the appliance to reach room
temperature before turning it on.
Carefully remove the appliance from the box. Prior to installing the appliance, remove all packaging material and
test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located
120V, 15 Amp minimum grounded outlet.
This appliance has been tested in accordance with the CSA Standards for fixed and location-dedicated electric
room appliances in the United States and Canada. If you need assistance during installation, please contact your
local dealer.
Model No.
CEFB36H-BS
Description
36" Electric Appliance
Voltage
120V / 240V
Watts
1500 / 3000W
Amps
Dedicated
15 AMP Grounded Circuit
Appliance Width
36 1/8" (918mm)
Appliance Height
31 7/8" (810mm)
Appliance Depth
11 1/4" (286mm)
Net Weight
66.1lbs (30.0kg)
Gross Weight
74.9lbs (34.0kg)
This appliance must be electrically wired and
grounded in accordance with local codes or,
in the absence of local codes, with the latest
edition of the National Electrical Code ANSI/
NFPA 70 in the United States or the Canadian
Electrical Code CSA C22.1 in Canada.
note:
1.3 listing approvals
1.4 general instructions
4.6A
• Prior to plugging your appliance into an electrical outlet, verify that the house circuit breakers for the outlet
are on.
• The appliance may emit a slight, harmless odour when fi rst used. This odour is normal and it is caused by
the initial heating of internal appliance elements and will not occur again.
• If your appliance does not emit heat when called for, consult the “operation” section of this manual for further
information.
• Use with a CSA or UL certifi ed surge protector.
• Do not route the power cord directly underneath the appliance.
This electric appliance meets the construction and safety standards of H.U.D. for application in manufactured
homes when installed according to these instructions.
1.5 unpacking and testing appliance
The appliance is factory wired for 120
volt power supply. If 240 volt operation
is required, see "electrical information"
section.
note:
Manual
(packaged on
top of appliance)
Outer Box
Brick Panels
(packaged at back
of appliance)
Remote &
Hardware Kit
(packaged on bottom
of appliance)
Exact packaging location may vary.
Some packaging has been hidden for
clarity.
