This wine cooler includes a stainless steel handle. To install the handle,
please follow the instructions below:
1. Remove the door seal in the area where the handle is to be installed
on the left side, as shown below in illustration # 1.
The seal moves easily by hand, no tools are required.
2. Align the handle with the installed screws. Tighten the screws using a
Phillips screwdriver until the handle is flush and snug against the door
frame. (Do not over tighten, as this will damage the handle).
3. Return the door seal to its original position.
4. If you choose not to use the supplied handle, just follow step 1 to
access and remove the installation screws, then place the two decorative
plugs in the two holes separately. Proceed to step 3 to return the door
seal to its original position.
IV. INSTALLING THE HANDLE IN
STAINLESS STEEL
Illustration # 1.
Illustration # 2.
1. Seal
2. Phillips head screws
3. Phillips head screwdriver
4. Handle
EN-22