33
BREAKDOWNS AND SOLUTIONS
Some malfunctions can be easily resolved. Before calling customer service or a repairer, please
consult the following table :
PROBLEM
POSSIBLE CAUSES & SOLUTIONS
The appliance makes
lots of noise?
⚫
Please adjust the front foot, keep the appliance
leveling.
⚫
Please keep the appliance a bit space from walls.
Liquid flowing sound
inside the cabinet?
⚫
It is normal because of the refrigerant working
inside.
The appliance does not
start?
⚫
Make sure the appliance is connected to the power
properly.
⚫
Make sure switch on the power.
⚫
The compressor re-starts after 5 minutes for a
power cut.
Compressor runs
continuously?
⚫
If no cold is
being produced, call the retailer’s
after-sale service.
Door does not seal
tightly?
⚫
After long time use, the door seal might get stiff &
distorted partially.
⚫
Heat the door seal with hot-wind blower or hot
towel.
⚫
The door seal get softened and close the door.
The appliance does not
cool sufficiently?
⚫
Please adjust temperature setting.
⚫
Keep the appliance away from sunlight or heat.
⚫
Please do not open the door frequently.
Unpleasant smells
inside cabinet?
⚫
A little bit plastic smell for newly-buy appliance is
normal and will disappear after a short time.
⚫
Clean the compartment and ventilate it for a few
hours.
Condensate on the
glass door?
⚫
Please do not open the door frequently or for a long
time.
⚫
Please do not set the temperature too low.
⚫
High ambient temperature and humidity would
cause condensate.
The light is not working?
⚫
Check the power supply first.
⚫
Call the retailer’s after
-sale service if the light is
broken.
Guarantee
Your refrigerating appliance is guaranteed by the manufacturer during a period of 24 months from the
purchasing date (The dated invoice as proof).
E
XCLUSIONS OFGUARANTEE
:
The guarantee do not cover the normal wear of the product, nor the problems or damages resulting
from :
(1) superficial deteriorations due tothe normal wear of the product ;
(2) defect or deteriorations due to contact with foodor liquidsand due to the corrosion generated by
rust ;
(3) any incident, abuse, misuse, modification, disassemblyorunauthorized repairs ;
(4) any wrong maintenance operation, use not conforming to the instruction for use of the productand
connection to an unproper power supply ;