30
1. Cleaning the compartment
Before power on, clean inside of the appliance and check the drainage pipe in good connection.
（
For
details, please refer to the “Maintenance and cleaning”
）
2. Put the appliance stand still
Before power on, level the appliance on the firm & dry floor for at least 30 minutes.
3. Power on
The appliance start operation and it will cool down inside after 1 hour, otherwise you should check the
power connection.
Control panel
If the keys are not active, please unlock first by pressing
”
on/off
”
and
”
Light
”
simultaneously for 3
seconds.
ON/OFF
1. Keep pressing the key 3 seconds, power down, goes to stand-by mode.
2. Keep pressing the key again 3 seconds to return back to normal working.
Light
Press the key, turn on or turn off the LED lights inside. In stand-by mode, the key is invalid.
UP
Press the key once, LED Display in regular flash showing current set temperature. Continue
pressing to adjust set temperature, one press increase 1
℉
. Regular flash quit after 5 seconds
detecting no press and new set temperature save. LED display return to show actual
temperature inside.
Down
Press the key once, LED Display in regular flash showing current set temperature. Continue
pressing to adjust set temperature, one press reduce 1
℉
. Regular flash quit after 5 seconds
detecting no press and new set temperature save. LED display return to show actual
temperature inside.
Child Lock
（
Combination key
）