CONTINENTAL EDISON CERVC001, User Manual

Page: 31 / 39

31
1. Install the side brush.
2. Place the machine on the ground to be cleaned.
3. Turn on the power button, music play accordingly. LED indicator is
on, the machine enters standby status.
4. Press start/pause button, machine starts working.
5. When in operation, press start/pause button, the machine will stop
temporarily.
6. When machine stops unexpectedly, LED indicator quick flashs in
3Hz, please check carefully if machine being entangled or brush
wheel fails to operate, if machine being entangled, take it to the
spacious place to re-start, if brush wheel fails to operate, take it out
and make it clean, If the machine still can not start properly,
product malfunction happens, a long press on the on/off button to
power off the machine, and start once again, If the malfunction can
not be recovery by its own, send it to after-sale service center for
repairing.
7. When machine stops working, LED indicator slow flashes 1Hz, it
means run out of battery, please charge it in time, the LED
indicator flashes when charging and will be constantly on after fully
charged, plug out the charger then.
A. How to remove and replace the main brush
Turn the robot upside down on a flat
surface, press the middle brush release
catch, take out the brush and wheel.
Clean the brush and the side wheel and
reverse procedure to reinstall.
V. INSTRUCTIONS TO USE