EN-21
III. INSTALLATION
• Do not carry the refrigerator horizontally or
upside down.
• Do not carry the refrigerator by holding the
door or the handle; the refrigerator must be
carried by lifting the lower part.
• The refrigerator should be placed on a hard,
level floor; if a damper is required, use non-
flammable damper blocks rather than the foam
support of the refrigerator.
• The refrigerator must be kept away from
damp places, where water can be easily
sprayed; water or dust should be removed
regularly with a soft cloth to prevent rust which
can affect the electrical characteristics.
• Place the refrigerator in a well ventilated
place, keep some space around and behind the
refrigerator and do not cover or obstruct the air
grille located on the back plate of the
refrigerator; keep the refrigerator away from
heat sources or direct sunlight.
When transporting this device, take it by the base and tilt it gently up
to 45 ° maximum. Do not lift the appliance by the door handle. Do not
put the device in a completely horizontal position or upside down.
Push the refrigerator using the rear rollers.
Please note:
After transporting the refrigerator, you must wait
at least 8 hours before putting it into service.
LOCATION
TRANSPORT
IMPORTANT:
the installation of this device requires several people