38
Lift the hood and hang it on the wall bracket.
Attach the check valve on the
hood and connect the
ventilation duct (supplied) to
the valve (see picture).
Installation for curved glass and T-shaped models
Slide the top part of the chimney
inside the bottom and pull the top
up to the desired height.
Once the chimney is positioned at
the correct height, hook the two
parts together, as shown below.
Summary of Contents for CEHDG60IV
Page 1: ......
Page 28: ...26 SCHÉMA ÉLECTRIQUE ...
Page 52: ...50 ELECTRICAL DIAGRAM ...
Page 53: ...CEHDG60IV_2017_v2 ...