English- 6
the left for time setting, the last three figures from the right for temperature
setting. Press “
+
” and “
-
” to set the first figures, then press
“SET” to set the second one. (Timing from 0 to 99 minutes.
The LCD shows minute if the countdown over one minute, while shows
second if below one minute.)
B. After setting time, press “SET” to set the third figure for temperature. The
third figure is the highest temperature setting.
(NOTE: due to the lowest temperature of the chip being just 100
℃
, the third
number shows “1” in
℃
display, while in
℉
display it only can be chosen from 2
and 3.); Then press “SET” Again to set the forth figure for temperature by pressing
“+” or “-“.Then press “SET” to set the last figure for temperature. Then press
“SET” for switching
℃
or
℉
by pressing “
+
” or “
-
”. Continue pressing “SET” to be
back to the first figure setting of LCD. (temperature setting from 100
℃
to 190
℃
)
C. When under working situation, press “
+
” or “
-
” to switch “
℃
” or “
℉
”. After
finishing the time and temperature setting, press “ON/OFF”, and the fryer
starts to work as per the settings. When it reaches the setting time, the buzzer
will beep for 20 seconds, and then pause for 10 seconds, then again beep for
20 seconds. The fryer will automatically shut off after three beeping times.
Meanwhile, the indicators (PROG/MANUAL) will quickly flicker twice in one
second which means finishing working.
Meaning of the indicators:
MARCHE LIGHT: Lights up when the device is plugged in. It turns off when
the device is disconnected.
CHAUFFE LIGHT: Lights up when the device works and turns off when it
no longer works.
PROG LIGHT: Lights up in automatic or continuous cooking mode. It lights
up when the appliance is plugged in and is turned off in programmable
cooking mode.
MANUEL LIGHT: Lights up in programmable cooking mode.
Unplug the appliance when cleaning.
Clean the outside of the fryer and the lid with a damp cloth.
Never use abrasive pads or alcohol.
Detach the handle from the basket.
Wash the basket with hot water or washing-up liquid. Rinse and dry
carefully.
The instructions for appliances normally cleaned after use, and not
intended to be immersed in water for cleaning. Shall state that the
appliance must not be immersed.
Cleaning
Function 3: Auto-set work model
A. When under standby situation, Press “SET” and the fryer goes to auto-set
situation, at this moment,
5 figures show on the LCD, the first two figures from
Summary of Contents for CEFR25IND
