EN - 8 -
Filling the water tank
• Remove the top cover of the water tank.
• Fill the tank up with water.
• Mount the top cover back on the water tank.
Attention
• Do not use the water dispenser for anything except water.
• If you leave water in the tank for a long time it could cause an odour. In this case,
clean the tank and keep using it.
• Clean the water tank before using it for the first time.
Cleaning the Water Tank
• Lift the water tank.
• Remove the tank cover by releasing the side locking covers.
• Clean the tank with warm water and reassemble the pieces that you have removed.
Stowing the Water Tank
• Install the water tank as shown.
• Make sure that the tap and the hole match each other while installing.
• Water flow may not be as expected if the tank has not been installed properly. Also
check that the gaskets have been assembled properly.
Drip Tray
• Use of the dispenser may cause water to collect in the drip tray. Remove the tray to
empty the water and then re-fit the tray.
Filter detail
• There is a filter cover with a filter in at the back of
the top cover. Do not use this cover.
• Please contact an authorised service agent about
exchanging the cover.
• Please contact an authorised service centre about
opening the cover and exchanging the filter.
.
Visual and text descriptions In the accessories section may vary according to
the model of your appliance.
CAUTION:
• While you take back your glass after pushing the glass lid in order to get water, it is
recommended that you wait a few seconds in order to prevent the water from dripping.
• Since there is a filter within the upper cover of the tank, this cover must not be
washed with water during cleaning; you might wipe it with humid cloth if
necessary.