23
•
NEVER MOVE THE APPLIANCE WHEN IN USE.
•
THE SUPPLY CORD SHOULD BE REGULARLY EXAMINED
FOR SIGNS OF DAMAGE AND THE APPLIANCE IS NOT TO
BE USED IF THE CORD IS DAMAGED.
•
NEVER PLUG THE APPLIANCE AND TOUCH THE
THERMOSTAT WITH WET HANDS. NEVER USE THE
APPLIANCE WITH BARE OR WET FEET.
•
NEVER UNPLUG THE APPLIANCE BY PULLING THE
POWER CABLE. ALWAYS UNPLUG THE APPLIANCE FROM
THE MAIN SOCKET.
•
DO NOT STORE ANY FLAMMABLE PRODUCTS CLOSE TO
OR UNDER THE UNIT WHERE YOU PLACED THE
APPLIANCE. DO NOT PLACE AND USE THE APPLIANCE
CLOSE TO ANY FURNITURE WITH FABRICS, CURTAINS OR
DRAPES.
•
IN THE CASE OF SOME PARTS OF THE APPLIANCE
DURING THE USE CATCH FIRE, DO NOT ATTEMPT TO
EXTINGUISH IT WITH WATER. USE A DAMP CLOTH OR A
BLANKET TO CHOKE THE FLAMES OR USE AN
EXTINGUISHER BY SPRAYING THE FOAMS TOWARDS THE
APPLIANCE AND ON THE SAME DIRECTION THAN THE
WIND.
For installation, handling, cleaning, and disposal of the device,
refer to the following chapters of the User's Guide.
Information on the marking of the
Conformity Compliance.
The marking
indicates that the product meets the main requirements of the European
Directives: 2014/35/EU (
Low Voltage
), 2014/30/EU (
Electromagnetic Compatibility
),
2011/65 / EU (
Restriction of use of certain substances in equipment electronic
).
Summary of Contents for AK-A007
Page 48: ...48 CEGGCR1200B_IM_112019_V1 ...
