manualshive.com logo in svg

Conti TWIN STAR 2, Technical Documentation Manual

Share
Download
Conti TWIN STAR 2 Technical Documentation Manual Download Page 10

 

 

7.2 Programming 

1 Cup

espresso

2 Cups

espresso

1 Cup

regular

coffee

2 Cups

regular

coffee

Cappuccino
(on left group)

Continous flow
(on the other groups)

LED

Hot water

dose

 

7.2.1  Programming of coffee measures :: 

To get into the programming mode: 
 

 

Insert and turn the programming key. The displays indicate 

 
 
 

 

Water volume 

Programming

 

Parameters 

Programming

Parameters 

Programming

 

  Press the right 

push-button

 (CAPPU/CONT) of the group to program. 

-   Programming the left group will also program the other groups. 
-   Programming the other groups will program each group individually. 

 

  The LED of the selected push-button 

blinks

: 

PROGRAMMING MODE 

 Start the programming within 

5 seconds

 (otherwise the machine will get out of the 

programming mode).

 

 

 Select the measure to be programmed by pressing the relevant button: 

-  All the LEDs of the group will go off,  

only the LED of the selected measure will remain alight. 

-  The LED of the button CONT/CAPPU blinks. 
-  The pump and the solenoid valve of the related group are activated. 
-  The water is flowing. Once the required measure is reached, press the button again to stop 

the flow. 

-  The data is stored. 
 
The PROGRAMMING MODE will remain for 5 seconds (the right LEDs are blinking). 
Continue the same procedure for the other measures of the group.  

 
NOTES:

 

 

 

During the 

PROGRAMMING MODE

 the LEDs of the already programmed push-buttons go off. 

 

 

Each group could be programmed individually: press the continuous flow button on the right of 
each group. 

 

 

Maximum flow time of the coffee measures: 

3 minutes.

 

 8 

Summary of Contents for TWIN STAR 2















































Reviews:

No comments

Brands by name

Popular brands

Load more brands