English
SFX-HO150W
- 150W Horiziode projector with white LED
Page 4
1
Filter holder
Allows you to add a colored filter and colorize your beam.
2
Rotative shutters
Allow you to adjust the light output from the projector.
3
Display and menu buttons
Display
Allows you to intuitively configure your device. Please refer to
next paragraph for more details about the menu functions. The
backlight can be turned off via the Backlight function from the
menu.
MODE
Button
ALlows you to access the menu and select a function.
ENTER Button
Allows you to enter sub-menus and apply changes.
UP and DOWN buttons
Allows you to increase or decrease parameter values.
4
Suspension bracket
Allows you to suspend and adjust the projector.
CAUTION!
Please make sure the tightening wheel is
securely fastened.
Using a safety cable is mandatory.
When using this device in public places,
current legislation requires that each devices features a
double fixation system to ensure its stability. This system
must hold up to 10 times times the weight of the device,
meaning you will be required to use a cable able to hold
62 kilos to support your SFX-HO150W.
5
Tightening wheel for suspension bracket
Allows to adjust the position of the projector and lock it in this
position.
5
Locking latch
Allows you to lock the filter holder and/or the rotative shutter
system.
6
DMX input/output
3 and 5-pin XLR plugs hardwired as follows:
- Pin 1: Mass
- Pin 2: Negative signal
- Pin 3: Positive signal
- Pin 5: Not connected
- Pin 6: Not connected
7
Power input socket
Allows you to power up your projector via Powercon
©
/ 2 poles
+ earth cable. This cable is supplied with the projector.
Please make sure the voltage of your workplace matches this
projector.
8
Power output socket
Allows you to connect your projector to another projector with
a Seetronic
©
Power male/female cord. This cord is not supplied
with the projector.
You can daisy-chain up to 19 SFX-HO150W onto the same 16
amps source.
9
Beam angle jog wheel
Hanging ring for safety cable.
9
ON/OFF Button
Activates or deactivates your projector.
11
Fuse
If need to change the fuse, please make sure the new fuse has
the exact same characteristics as the old one.
