English
SFX-BE15QC
-
15W quadricolor LED 4° beam projector
Page 4
1
Locking latch
Allows to lock the filter holder.
2
Display and menu buttons
Display
Allows you to intuitively configure your device. Please refer to
next paragraph for more details about the menu functions. The
backlight can be turned off via the Backlight function from the
menu.
MODE
Button
ALlows you to access the menu and select a function.
ENTER Button
Allows you to enter sub-menus and apply changes.
UP and DOWN buttons
Allows you to increase or decrease parameter values.
3
USB port
This USB port is used exclusively for connecting a wireless DMX
dongle.
This dongle is used to control the projector via DMX protocol.
4
Power input
Allows you to power up your projector via Powercon
©
Power /
2 poles + earth cable. This cable is supplied with the projector.
Please make sure the voltage of your workplace matches this
projector.
5
Power output
Allows you to connect your projector to another projector with a
Powercon
©
Power male/female cord. This cord is not supplied
with the projector.
The maximum load accepted by this output is 16A.
6
DMX input
3-pin male XLR hardwired as follows:
- Pin 1: Mass
- Pin 2: Negative signal
- Pin 3: Positive signal
7
DMX output
3-pin female XLR hardwired as follows :
- Pin 1: Mass
- Pin 2: Negative signal
- Pin 3: Positive signal
8
Fuse
If need to change the fuse, please make sure the new fuse has
the exact same characteristics as the old one.
8
Filter holder
This filter holder is used to support the frost filters supplied
with the unit.
9
Double hook ring
CAUTION!
Please make sure the tightening wheel is
securely fastened.
Using a safety cable is mandatory.
When using this device in public places,
current legislation requires that each devices features a
double fixation system to ensure its stability. This system
must hold up to 10 times times the weight of the device,
meaning you will be required to use a cable able to hold
20 kilos to support your SFX-BE15QC.
