LED-UV12
- 12x3W UV LEDs projector
Page 5
English
4 - Rear panel description:
1
Power input
Allows you to connect the projector to an electrical
outlet.
Please make sure the voltage is in adequation with
the product indications.
2
Power output
Allows you to add more projectors to your chain.
Warning
: Please make sure to never plug more than
700W on the same electrical outlet.
3
DMX input
3-pin female XLR plug hardwired as follows :
- Mass: 1
- Negative signal: 2
- Positive signal: 3
4
DMX output
3-pin male XLR plug hardwired as follows :
- Mass: 1
- Negative signal: 2
- Positive signal: 3
Can be used to daisy-chain several units.
5
Display
This intuitive display allows you to configure your
projector. Please refer to the next paragraphs for
more details about the projector configuration. The
display backlight can be deactivated via the Back
Light command menu.
6
Menu buttons
Allow you to configure the projector and access its
functions.
5
1
3
4
6
2
