HELIPTIC-9x10WH
- 3x3 White beams animation projector with non-stop PAN rotation
Page 5
English
4 - Internal menu
MENU
UP and DOWN
Action
ENTER
DMX address selection
Press ENTER and select the adress with UP and DOWN
Saves
changes
Modes
Master
, Slave1 and Slave 2 selection.
Press ENTER and use the UP and DOWN buttons to select a mode.
The Slave 2 mode reverses the PAN and TILT movements, and the sequences order in
relation to the master projector.
Saves
changes
1
channel : Select the pre-programmed sequences: 0 - 15
Press ENTER, mode
selection with UP
and DOWN.
Press MENU for more
than 3 seconds to
activate the DMX
mode.
Saves
changes
11
channels : Non-stop Pan, Pan, Tilt1, Tilt2, Tilt3, Movement
macros, Movement macros speed Main dimmer, Strobe, Effect
macros, Effect macros speed
16
channels : Non-stop Pan, Pan, Tilt1, Tilt2, Tilt3, Main dimmer,
Strobe, individual LED dimmers
20
channels : Non-stop Pan, Pan, Tilt1, Tilt2, Tilt3, Movement
macros, Movement macros speed, Main dimmer, Strobe,
individual LED dimmers, Effect macros, Effect macros speed
Shows are music-sensitive.
Please make sure the music-sensitive mode is activated (Sound State menu).
Show 0 starts a 1 - 15 show sequencing.
Saves
changes
Adjusts the dimmer speed.
Saves
changes
Activates or deactivates the music-sensitive mode.
Press ENTER and select On or Off with the UP and DOWN buttons.
Saves
changes
Adjusts the microphone sensitivity (for music-sensitive modes) .
When the value is 000, the microphone is deactivated.
Saves
changes
Activates or deactivates the Black out mode.
Press ENTER and select On or Off with the UP and DOWN buttons.
Saves
changes
Activates or deactivates the display backlight.
Press ENTER and select On or Off with the UP and DOWN buttons.
When Off, the display automatically turns off after a 30-second inactivity period.
Saves
changes
Once turned on, the moving head will start a position initialisation for each motor. At this stage, the display indicates
. Once the initilisation is
over, the display will indicate
, you will then be able to access the menu using the MENU or ENTER buttons. If the menu remains inactive for 30
seconds, the display will indicate
and locks. To access the menu again, press ENTER.
