English
IPFLOOD5x15QC
- 5x15W quadricolor LEDs battery operated wireless outdoor projector
Page 12
This menu allows you to configure the projector reactions, adjust the ventilation, customise the display and reset all
functions to factory settings.
7.3
Menu
Submenus
Lower-level
menus
Values
Description
Activates addressing via a DMX controller.
Configure the projector reactions in case of DMX signal
interruptions :
• Close Shutter
: The projector blacks-out
• Hold
: The projector holds onto the last information received
• Auto Program
: The projector activates the Auto mode via built-in
programs
Timer after which the display shuts off when it remains inactive.
This timer goes from 2 to 59 minutes. When OFF, the display will
never shut off.
Locks the keyboard when it remains inactive for more than 15
seconds.
They keyboard can be unlocked by holding the menu button for
more than 3 seconds.
Allows you to choose which unit of temperature will be displayed.
Configures the initial state of the projector :
• ON
: Once switched on, the projector will start with the last colour used via the
ManCntrl menu before being switched off, if there is no DMX signal. If there is a DMX
signal, the projector will react to it.
• OFF
: the projector will start with the last colour used.
Configures the wireless receiving module :
• WDMXOff
: Deactivates the wireless DMX function
• ActWDMX
: Activates the wireless DMX function
• AcDaOut
:
When this mode is activated, the incoming wireless DMX signal is directed
toward the DMX XLR output. This allows you to add several other non-wirelesss projectors
to the DMX network.
• ClrWDMX
: Resets the wireless receiving module: use this function when you modified
the DMX address and want to synchronised again the emitter with the receiver.
Resets to factory settings.
This function can be unlocked with the following password : 011.
