English
ROTOR7i
- 7 x 15W 4-in-1 LED BAR with Artnet and infinity move
Page 9
7.3 PERSONALITY (continuation and end)
Submenus
Lower menus
Values
Description
Status
(continuation)
Mov. Speed
Speed
1
~ 4
Determines the AUTO mode movement speed :
1 = fastest ; 4 = slowest
Mic Sens
0 ~ 99%
Configures the internal mic sensitivity when using the
music-sensitive mode
Stand By
OFF
01m ~99m
(05m)
Sets a timer for the moving head to enter the sleep mode
if no DMX signal has been received.
The moving head will automatically resets when a DMX
signal is detected again.
The default value is 15 minutes.
LCD Set
Shutoff time
02 ~60m
(05m)
Timer after which the display shuts off when it remains
inactive.
Display Reverse
ON/
OFF
Rotates the display on a 180° angle
Key Lock
ON/
OFF
Allows you to lock the keyboard after a 15-second period
of inactivity.
The keyboard can be unlocked by pressing the Menu
button for 3 seconds.
Disp Flash
ON/
OFF
The display flashes when no DMX signal is detected.
Temp. C/F
Celsius
/ Fahrenheit
Allows you to choose which unit of temperature will be
displayed.
Dim. Curve
• Standard
• Stage
• TV
• Architectural
• Theatre
The dimmer gradation speed depends on the mode used.
Please refer to chapter 8.2 for more information about
this.
Init. Status
Auto Program = XXX
PAN = XXX
....etc
Allows you configure the initial state of each function
when the projector is switched on.
Default
ON/
OFF
Resets to factory settings.
Please note that user programs will be erased.
ChannelValue
PAN, TILT, ...
Displays the value of each channel
Ethernet
Fixture Id
Service PIN
PIN=XXX
Service PIN 050
RDM PID
XXXXX
Displays the RDM PID code
Unit IP Addr
XXX.XXX.XXX.XXX
Sets the IP address of your device
Universe
000 - 255
Sets the Universe address of your device
Protocol Set
ArtNet, KlingNet
Allows you to choose the Internet protocol used
Net Switch
ON/
OFF
Activates or deactivates the Ethernet output
