For assistance, call: Customer Service 18002478465
Step 5:
Attach
Bottom.
Grooves in Bottom
fit over Backs and Divider.
(4) Hex screws
and Allen wrench used in this step.
Step 6:
Set unit upright, resting edges
of Sides on floor. Tighten all screws
snugly.
DO NOT OVERTIGHTEN.
DO NOT DRILL.
Assembly is now
complete.
Step 4:
Slide in
all Backs.
No hardware required in this
step. Backs will sit in grooves of Divider , Top, and Left
Side. Loosening of Seat and Shelf may be needed to slide
backs along grooving in Left Side and Divider.
Step 5:
Attach second
Side
piece
using
(8)
supplied Hex screws and
Allen wrench. Grooves in Right
Side overlap previously assembled
components.
