ASSEMBLY INSTRUCTIONS
Step 7:
Insert edge of
Short Divider
into mortise
of
Side Piece,
and
Center
Shelf
. Repeat for remain-
ing
Short Dividers
.
Step 8:
Insert edge of
Back Piece
into
mortise of
Side Piece,
and
Center
Shelf
until edge rests firmly in the
back groove of
Bottom Piece
.Repeat
for remaining
Back Piece
.
Step 9:
Insert edge of
Top Piece
into
remaining mortise of the
Side Piece
.
aligning back grooves. Insert edge of
each divider into the corresponding
mortise on
Top Piece
. Insert hex
screws into pre-drilled holes of
Top
Piece
and tighten down halfway.
Step 10:
Fit remaining
Side Piece
over
edge of the assembled pieces, inserting
edges into mortises of
Side Piece
.
Make sure that back panels fit into back
grooves of
Side Piece
. Insert hex
screws into pre-drilled holes on
Side
Piece
and tighten down halfway.
Step 11:
Finish tightening all hex
screws. DO NOT OVER TIGHTEN.
Stand unit upright so that it is resting on
Bottom Piece
and the edge of the
Side
Pieces
. Assembly is complete.