Front Panel Setup
To Enter a Front Panel Programming Mode:
1.
Press and hold the Power button such that the red LED light above is lit (indicating Mute
On).
2.
Press Volume Up.
3.
Release all buttons, the 232-ATSC will now be in the front panel programming mode.
4.
The front panel display is dedicated to programming information display while in this
mode.
5.
Changes are saved in non-volatile memory as they are entered.
6.
The Volume up/down buttons scroll through programming modes 0 through 9 and 10+.
7.
The Channel up/down buttons scroll through possible parameters for each mode.
To Exit the Front Panel Mode
Push and release the Power button.
Mode
Parameters
Baud Rate
1.1
1.2
1.3
1.4
1.5
1.6
1.7
300
600
1200
2400
4800
9600 (Default)
19200
Unit Number
2.1
2.2
2.3
2.x
One (Default)
Two
Three
Four – Nine
Not Used
3.0
Panel Lockout
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
None (Default)
Channel up/dwn
Volume up/dwn
Channel & Volume up/dwn
Power
Channel up/dwn & Power
Volume up/dwn & Power
All
Power-up Volume
5.0
5.X
Restore previous level
1 – 63 sets volume level
Firmware Version
6.40
Ex: Version 6.4 - Press and hold Channel Up, then Power to
restore tuner to default settings
IR Receive
15.0
15.9
0 - No IR reception
9 - CR 9 (Default)
HD Output
18.0
18.1
18.2
RGB (Default)
N/A
Component
HD Format
19.0
19.1
19.2
19.3
0=1080i
1=720p
2=480p
3=480i
Contemporary
Research
6
232-ATSC Digital HDTV Tuner
