Dimensions
Page 1: ...signals with its attached PD and provides the 48VDC PoE power on two pairs of the Cat5e cable for use by the PD The EISK8P GT supports the 802 3af protocol for powering up devices as follows With the switch powered up an Ethernet cable ties any of ports 5 8 to an attached device but the port delivers no power until the attached device is checked for a valid 25 kΩ resistance the PD signature Once t...
Page 2: ... BI_DA 48 VDC 2 BI_DA 48 VDC 3 BI_DB 48 VDC Return 4 BI_DC 5 BI_DC 6 BI_DB 48 VDC Return 7 BI_DD 8 BI_DD Network Connections Either straight through or crossover cables can be used to connect to a non PoE Ethernet device that supports Auto MDI X or to a PoE powered device However verify that the proper polarity of the PoE power on pins 1 2 3 and 6 remains intact LED Indicators The Power LED glows ...
Page 3: ...Dimensions ...
Page 4: ...ation damages the product repair or replacement are not covered Damage from abuse accident disaster misuse or incorrect installation are not covered This warranty in no way warrants suitability of the product for any specific application More warranty information can be found at www ccontrols com Warning This is a Class A product In a domestic environment this product may cause radio interference ...
