4. Jumper Setting
SPC-8450-LVA
29
CF Master/Slave Selector: JP6
On board CF slot is connected to Secondary IDE. This jumper is select Master/Slave of CF memory card.
Usually, please use it with a master setup.
Table 4.4.
CF Master/Slave Selector (JP6)
JP6
Function
Master(Default)
Slave
1
2
1
2
ATX/AT Power supply select: JP9
This jumper is set up according to the power supply type to be used.
Table 4.5.
ATX/AT Power supply select (JP9)
JP9
Function
ATX(Default)
AT
3 2 1
3 2 1
Clear CMOS Content: JP10
The time, date, and CMOS values can be specified in the Setup program. The CMOS values can be
returned to their defaults by using the Setup program. The RAM data contains the password information
is powered by the onboard battery. User can erase the CMOS memory content by short pin2 and pin3 of
JP10.
Table 4.6.
Clear CMOS Content (JP10)
JP10
Function
Normal Operation(Default)
Clear CMOS Content
3
2
1
3
2
1
Summary of Contents for SPC-8450-LVA
Page 7: ...vi SPC 8450 LVA...
Page 31: ...3 Hardware Installations 24 SPC 8450 LVA...
Page 37: ...4 Jumper Setting 30 SPC 8450 LVA...
