Contec RP-COM(FIT)H, User Manual

Page: 43 / 49

8. Appendix
38
RP-COM(FIT)H, RP-COM(FIT)H-AF
Table 8.2. Installation Environment Conditions (Environment Specifications)
Parameter Requirement description
Operating temperature 0 - 50 ° C
Storage temperature -10 - 60
°
C
Humidity 10 - 90 % RH (No condensation)
Floating dust particles Not extreme
Corrosive gases None
Line-noise *1 AC line/±2kV, Signal line/±1kV
(IEC1000-4-4Level 3, EN61000-4-4Level 3) Line-Noise resistance
Static electricity resistance Contact discharge/±4kV
(IEC1000-4-2Level 2, EN61000-4-2Level 2)
Atmospheric discharge/±8kV
(IEC1000-4-2Level 3, EN61000-4-2Level 3)
Vibration resistance Sweep resistance 10 - 57Hz/semi-amplitude 0.15mm, 57 - 150Hz/2.0G
40minutes each in X, Y, and Z directions
(JIS C0040-compliant, IEC68-2-6-compliant)
Impact resistance 15G, half-sine shock for 11ms in X, Y, and Z directions
(JIS C0041-compliant, IEC68-2-27-compliant)
Grounding Class D grounding (previous class 3 grounding)
*1 : When using POA201-10-2 for RP-COM(FIT)H, when using POA200-20-2 for RP-COM(FIT)H-AF
Table 8.3. Software Specifications
Item Specification
Protocols IP (RFC 791), ICMP (RFC 792), UDP (RFC 768), ARP (RFC 826),
SNMP (RFC 1157), MIB II (RFC 1213)