Contec POW150X User Manual Download Page 3

Page: 3 / 4

POW150X User’s Manual

POW150X

電源ユニットを留めている、背面

箇所と内側

箇所のネジを外し、電源ユニットを取り外

します。

Remove three screws on rear and two screws inside that hold in place of the power unit

from the rear panel. Then take the used power unit out.

3-piece screws

Nut

Spring washer

Washer

Rear

Power Supply

Screw

新しい電源ユニットを背面

箇所、内側

箇所でネジ留めして実装してください。

Replace this new power unit into the chassis. Fix the unit to the rear panel with four

screws on rear and two screws inside. Tighten the screws so that the unit is held in

place.

3-piece screws

Nut

Spring washer

Washer

Rear

New

Power Supply

Screw

Summary of Contents for POW150X

Page 1: ...ECH PCI FA PAC PCI Thank you for purchasing the POW150X POW150X is a power supply for the exchange of the ECH PCI series and the FA PAC PCI series Please use it referring to the following matter 1 Thi...

Page 2: ...First remove the power cord from the chassis And remove the screws that hold in place the cover Then open the cover Cover Screw Rear Power Cord 2 Remove the power connectors from the fan and backplane...

Page 3: ...hen take the used power unit out 3 piece screws Nut Spring washer Washer Rear Power Supply Screw 4 3 2 Replace this new power unit into the chassis Fix the unit to the rear panel with four screws on r...

Page 4: ...d the power supply based on the following diagram respectively Back Plane Power Supply Rear Fan Front 6 Fix the chassis cover with screws Tighten the screws so that the cover is held in place Connect...