Contec PC-SDD32V3-SC User Manual Download Page 8

PC-SDD32V3-SC, PC-SDD64V3-SC, PC-SDD320V3-SC

CONTEC CO., LTD.

- 8 -

Limited One-Year Warranty

CONTEC Interface boards are warranted by CONTEC CO., LTD to be
free from defects in material and workmanship for up to one year from
the date of purchase by the original purchaser.

Repair will be free of charge only when this device is returned freight
prepaid with a copy of the original invoice and a Return Merchandise
Authorization to the distributor or the CONTEC group office, from
which it was purchased.

This warranty is not applicable for scratches or normal wear, but only
for the electronic circuitry and original boards.  The warranty is not
applicable if the device has been tampered with or damaged through
abuse, mistreatment, neglect, or unreasonable use, or if the original
invoice is not included, in which case repairs will be considered beyond
the warranty policy.

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a copy
of the original invoice.  Please obtain a Return Merchandise
Authorization Number (RMA) from the CONTEC group office where
you purchased before returning any product.

*No product will be accepted by CONTEC group without the

RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the product.  In
no event will the warrantor be liable for any incidental or consequential
damages due to such defect or consequences that arise from inexperienced
usage, misuse, or malfunction of this device.

Summary of Contents for PC-SDD32V3-SC









Reviews: