2-4
▍
Hardware Setup
GMB-Q7710-LLVA User’s manual
CPU & Cooler Installation
1. Open the load lever.
2. Lift the load lever up to fully
open position.
3.
After confirming the CPU
direction for correct mating,
put down the CPU in the
socket housing frame. Be
sure to grasp on the edge of
the CPU base. Note that the
alignment keys are matched.
4. Remove the plastic cap.
Engage the load lever while
pressing down lightly onto
the load plate.
Important
Visually inspect if the CPU is seated well into the socket. If not, take out
the CPU with pure vertical motion and reinstall.
When you are installing the CPU, make sure the CPU has a cooler at
-
tached on the top to prevent overheating. Meanwhile, do not forget to
apply some thermal paste on CPU before installing the heat sink/cooler
fan for better heat dispersion.
Follow the steps below to install the CPU & cooler correctly. Wrong instal
-
lation will cause damage to your CPU & mainboard.
