—
Safety Precautions
—
GMB-L3WHL200 Reference Manual
-
14
-
⚫
Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or
discoloration of the paint.
⚫
This product’s case may become hot. To avoid being burned, do not touch that section while
this product is in operation or immediately after turning off the power. Avoid installation in a
location where people may come into contact with that section.
⚫
Always remove the power cable from the power outlet before mounting or removing an
expansion board and before connecting or disconnecting a connector.
⚫
To prevent corruption of files, always shutdown the OS before turning off this product.
⚫
CONTEC reserves the rOKight to refuse to service a product modified by the user.
⚫
In the event of failure or abnormality (foul smells or excessive heat generation), unplug the
power cord immediately and contact your retailer.
⚫
To connect with peripherals, use a grounded, shielded cable.
⚫
Component Life:
1)
Battery – The internal calendar clock and CMOS RAM are backed by a Lithium primary battery.
* Replacement of expendables is handled as a repair (there will be a charge)
* The service life for consumable parts are reference values and are not guaranteed values.
* This product’s specifications allow the device to be rebooted from the BIOS screen during
startup. This has no effect on operation after the OS boots.
Summary of Contents for GMB-L3WHL200
Page 4: ...4 Table of Contents Customer Support and Inquiry 83 1 Services 84...
Page 48: ...48 BIOS Setup This section describes AMI s Setup program built into the FLASH ROM BIOS...
Page 73: ...Appendix GMB L3WHL200 Reference Manual 73 2 Block Diagram...
Page 74: ...Appendix GMB L3WHL200 Reference Manual 74 3 Dimension...