Troubleshooting
68
GMB-C2165-LLVA User
‟
s Manual
Serial ATA Hard Disk Setting for IDE/RAID/AHCI mode
Unlike IDE bus, each Serial ATA channel can only connect to one SATA hard disk at
a time; there are total five connectors, SATA1~5 port. The installation of Serial ATA
is simpler and easier than IDE, because SATA hard disk doesn‟t require setting up
Master and Slave, which can reduce mistake of hardware installation. All you need
to operate IDE, RAID (0/1/5/10) and AHCI application for system, please follow up
setting guide in BIOS setup utility
5.2
BIOS Setting
It is assumed that users have correctly adopted modules and connected all the
devices cables required before turning on ATX power. CPU, CPU Fan, 204-pin DDR3
memory, keyboard, mouse, floppy drive, SATA hard disk, DVI connector, but it only
can use on DVI-D function, doesn‟t support DVI-I function, device power cables,
ATX accessories are good examples that deserve attention. With no assurance of
