4. Setup and Status Display
46
FXE3000 Series
sysLocation
Set a description of the installation location for the device as alphanumeric characters with a maximum
length of 32 characters.
It is okay to leave this value blank.
Default setting : Unknown
▼
Trap Settings
Trap IP Address
Traps are a function to notify users that a change has occurred in the SNMP agent system. The trap
function can be enabled by specifying the trap destination IP address, and the trap is sent to the specified
IP address.
When set to 0.0.0.0, the trap function is disabled.
Default setting : 0.0.0.0
Notification : Link Status (Ethernet)
Set whether or not to send a trap when the wired network link status has changed (link up/down).
When enabled, the device sends a trap regarding the wired network link status change.
Default setting : Disable
Notification : Link Status (WLAN)
Set whether or not to send a trap when the wireless network link status has changed (link up/down).
When enabled, the device sends a trap regarding the wireless network link status change.
Default setting : Disable
Notification : Channel Change (DFS)
Set whether or not to send a trap when a channel change occurs by DFS when "Unit Type" is access point
and "Channel" is set to a channel subject to DFS.
When enabled, the device sends a trap regarding the DFS channel change.
Default setting : Disable
Notification : Initialize (INIT-SW)
Set whether or not to send a trap when the device was initialized by pressing the initialization switch on
the unit. When enabled, the device sends a trap regarding initialization by the initialization switch.
Default setting : Disable
