Contec DIO-48DX-USB, User Manual

Page: 16 / 47

2. Setup
DIO-48DX-USB
11
Step 2 Initializing the Software
Install software.
The following description assumes the operating system as Windows XP. Although some user interfaces
are different depending on the OS used, the basic procedure is the same.
Points
-
If you are using Windows XP or Windows 2000, please log on as Administrator (authorized
account) before proceeding to the following steps.
The following shows the basic flow for installing product.
Illustration of Menu Screen
Points
-
Please set up the supplied CD-ROM if it has not been set up. The menu starts automatically.
- If the menu do not start, launch X:AUTORUN.EXE(X:CD-ROM drive) from [Run…] in Start
menu.
- The screen design may be different.
Setting Properties Using
Device Manager
- Setting the Device
Name.
Page 11
Page 14
Page 16
Connecting the Product
- Connecting the PC Initializing the Software
- Installation of
API-USBP(WDM)
Development Environment
Install C-LOGGER.
* Cannot be used for this product.
Refer to the content of CD-ROM.
Install Development Environment such as sample
programs and online help
Refer to the user’s guide.
Install utility.