3. External Connection
DIO-1616RL-PE, DIO-3232RL-PE
27
3.
External Connection
This chapter describes the interface connectors on the board and the external I/O circuits.
Check the information available here when connecting an external device.
Using the On-board Connectors
Connecting a Device to a Connector
To connect an external device to this board, plug the cable from the device into the interface connector
shown below.
DIO-1616RL-PE
* Please refer to chapter 1 for more information on the supported cable and accessories.
Figure 3.1. Interface Connector (CN1) Shape
DIO-3232RL-PE
* Please refer to chapter 1 for more information on the supported cable and accessories.
Figure 3.2. Interface Connector (CN1) Shape
CN1
37
20
19
1
36
18
21
2
Interface connector (CN1)
- Connector used
37-pin D-SUB, female connector
DCLC-J37SAF-20L9E (mfd. by JAE) or equivalent to it
Thumb screw : UNC#4-40 (inch screw)
- Applicable connectors
17JE-23370-02(D8C)-CG (mfd. by DDK, Male)
FDCD-37P(55) (mfd. by HIROSE, Male)
DC-37P-NR (mfd. by JAE, Male)
Interface connector (CN1)
B48
B47
A48
A47
A02
A01
B02
B01
- Connector used
PCR- equivalent to it
[mfd. by HONDA TSUSHIN
KOGYO CO., LTD.]
- Applicable connectors
PCR-E96FA+ equivalent to it
[mfd. by HONDA TSUSHIN
KOGYO CO., LTD.]